友情链接 - 倍嘉科技

VAG CAN Commander 5.1 cable features: Compatible with certain models of VW, Audi, Seat, and Skoda; Connect your computer to your car; USB to OBDII - CANBUS connection; Displays live data from your vehicle; Displays diagnostic trouble codes (DTCs) and definitions on screen...

10 in 1 Service Light & Airbag Reset Tool is an essential tool for resetting of oil service light, service warning light, service mileage, service intervals and airbag warning light on European made.

Opel Airbag Resetter works through obd connetor directly without any computer and with one lick on button,you will finish the airbag resetting,very convenient and easy to practice.

BMW B800 Airbag Scan/Reset Tool is available for most BMWs built between 1994 and 2003. B800 supports displaying all SRS fault codes and resetting the "SRS" Light.

Airbag Resetting and Anti-Theft Code Reader applicable to Volkswagen vehicles,can read out the code quickly as well as reset the airbag precisely.

Tachopro 2.0V VW AUDI Odometer Correction Mileage Tool :1. The TachoPro software might not work on PC`s that are faster than 233 MHZ. 2. Interface electronic of the Tachopro & K/L is the same, only tachoPro have the dongle inside.3. Make sure using the Tachopro Software under PLAIN DOS only not under windows or a windows command shell

BMW 20pin to obd2 16 Pin Connector is a brand new data link cable, used specifically for connecting your OBD2 scanner and your vehicle with this 20 pin connector which is specifically for BMW's.

Mercedes Benz 38Pin Connector,works on all Mercedes Benz vehicles with a 38 PIN diagnostic connector.

Motorola 9S12 Programmer is used for Motorola 912, 9S12 series MCU,mainly applying to the appearance adjustment of the latest Land Rover models and the EIS CAS adjustment of BENZ and BMW.

MC68HC11 Motorola 711 Programmer features: Communication with PC via a serial port; Easy to use Windows 98/ME/XP software; In-circuit/On-board EEPROM programming; High Speed EEPROM Programming;CONFIG Register Programming

The MC68HC908AZ60 programmer supports Motorola MC68HC(9)08AZxx/ASxx, MC68HC05H12 microcontrollers internal EEPROM and FLASH reading, programming. This MCU most used in automotive computers (dashboards, AIRBAG, immobilizers).

The MC68HC705B16 programmer supports programming of Motorola 68HC05Bxx, 68HC05Xxx microcontrollers internal EEPROM - most used programmable device in car radios, automotive computers (dashboards, AIRBAG, immobilizers).

This device is a Dash Programmer or ECU Flasher designed for Vehicles using the NEC MCU such as Citroen,Peugeot, Hyundai, Honda, Suzuki, Renault, Opel, Alfa, Chevrolet (please refer to the Applicable Models below) that allows you to modify/reprogram your car’s computer or correct the odometer reading.

ELM327 is the latest PC-based scan tool.It supports all OBD-II protocols and is dispatched with a number of compatible programs. The processor is an ELM327. The output protocol (connection to laptop) is USB cable.It is easy to use and very useful to diagnose cars.

MUT-3 Diagnostic Tool
1.MMC has developed the MUT-III as a next generation diagnosis tester for servicing these new and future vehicles.
2.the MUT-III system can display data as easy-to-understand diagrams and graphs on a large screen of the PC

The VAS 5054A ODIS V4.4.1 is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers,mainly do AUDI VW Seat.It is bluetooth version.

1) H-onda GNA600 interface module kit works with the OEM-H-onda Diagnostic PC Software (HDS).
2) GNA600 can diagnose all Honda and Acura vehicle systems on models from 1992 to 2012 year.
3) GNA600 Version: V2.0274) Mulit Language

1.You can read/erase all fault codes with this device,
2.also can read ecu information.

Benz AK400 key Programmer Simple introduction:IR-Programmer (for Benz key) +Hitg2 programmer (for BMW key) +BEZN ESL (election steering lock)K-Line programmer+912/9S12 in circuit programmer+68HC711 pragrammer+68HC705/05 programmer+68HC908 programmer+9CXX/95PXX/24CXX s-eprom programmer For BENZ key reader for BMW key reader

1.Determination of chassis, model, engine, gearbox and complete set.
2.BMW scanner 1.4.0 is a tool for scanning and diagnosing vehicles.
3.Although BMW scanner can perform IKE / LCM / EWS.